Products
CPS4282 type dichotomy frequency surround speaker system

·Dichotomy frequency surround speaker system
·It can connect more units by parallel output
·Level scattering angle is 100 degrees, vertical scattering angle is100 degrees
·It has a quick installation trestle for fast, simple and safe installation
·High power load bearing strength has optimized for the digital sound reproducing
·Loudspeakers box is made of high strength ABS materials, with compact structure and good performance of vibration control
·It has an adjustable hanger-bearing structure for simple installation, and a wide compass and smooth acoustic covering

CPS4282 is high-powered, high sensitivity dichotomy frequency surround speaker system with a loaded high-pitch horn. Its loudspeaker box is made of high-strength ABS materials, with compact structure and good performance of vibration control. It has an adjustable hanger-bearing structure for simple installation and has a wide compass and smooth acoustic covering, which can faithfully reproduce the atmosphere of the environmental sound in digital-sound movies. It will be the best choice for digital movie surround reproducing.

technical parameters
CPS4282
Frequency response
50-20KHz(-6dB)
 Coverage angles
100 º×100 º (H×V)
 
Woffer
High frequency drive
Unit model
PW818
PD2104
transducer
Φ 220 mm high efficiency low frequency speakers, Φ 38.6 mm KAPTON skeleton voice coil,, Φ 126 mm strontium qualitative magnets.
Φ 25.5 mm titanium coating compression drive structure, KAPTON skeleton rectangular section copper coated aluminium wire voice coil,, Φ 85 mm strontium qualitative magnets.
Nominal impedance
sensitivity 1w/1m
94dB
Rated Input Power
200W
Maximum input power
400W
Maximum SPL
120 dB
Connection
2 metal connecting terminals, the biggest standard wire is 6 mm2.
dimensions
370mm×380mm × 220mm  (H×W×D)
Net weight
6.2kg

PS:
1. All listed frequency ranges are measured in free sound field. (half space, 2 PI)
2. The pressure level can be calculated in 1 meter, the speaker is rated continuous power output, the signal source is pink noise, within the designated frequency range.
3. Maximum output power test meets IEC268-5 recommend standard, 50 Hz-20 KHz bandwidth, 6 dB signal peak factor.
SinoCinetech Co., Ltd 2012 © Copyright